Author: admin

FEEDER CABLE RFA 1/4″-50 Ohm

Feeder

Specifications

Codes
Type Code
RFA 1/4”-50 NKRFA01400
RFA 1/4”-50 GHF NKRFA01401
RFA 1/4”-50 BHF NKRFA01402
RFA 1/4”-50 BHF (UL) CATVR NKRFA01404
CONSTRUCTION
Inner conductor Copper-clad aluminium wire Ø 2.4 mm (0.09 in)
Dielectric Cellular polyethylene Ø 6.0 mm (0.24 in)
Outer conductor Corrugated copper tube Ø 7.5 mm (0.3 in)
Jacket See Jacketing Options table below Ø 10.0 mm (0.39 in)
Marking Draka, cable type, manufacture week,year, batch number and meter mark
ELECTRICAL CHARACTERISTICS at +20°C (+68ºF)
Characteristic impedance 50 ± 1 Ω
Return loss 24 dB for 100 m cable with NKC connectors
• 380–500 MHzM
• 806–960 MHz
• 1710–1880 MHz
• 1900–2170 MHz
Other bands also available on request
Bands according to customer’s specifications
Attenuation See table
Velocity factor 0.83
Capacitance 80 pF/m (24 pF/ft)
Maximum frequency 16 GHz
Max power rating See table
Peak RF voltage rating 1.04 kV
Peak power rating 11.6 kW
DC-resistance
• Inner conductor 5.55 Ω/km (1.69 Ω/1000 ft)
• Outer conductor 4.11 Ω/km (1.25 Ω/1000 ft)
JACKETING OPTIONS
Type Jacket IEC 60754 -1/-2 halogen free, non corrosive IEC 61034 low smoke emission IEC 60332-3-24 fire retardant UV Retardancy UL Rated Min. installation temperature
RFA 1/4”-50 Black, halogen free polyethylene yes no no yes no -40°C(-40°F)
RFA 1/4”-50 GHF

 Grey, halogen free retardant thermoplastic fire yes yes yes no no -20°C(-4°F)
RFA 1/4”-50BHF Black, halogen free fire retardant thermoplastic yes yes yes yes no -20°C(-4°F)
RFA 1/4”-50 BHF (UL) CATVR Black, halogen free fire retardant UL Riser rated jacket yes yes yes yes yes -20°C(-4°F)
ATTENUATION
Frequency MHz Attenuation dB/100 m Attenuation dB/100 ft Power rating kW
10 1.31 0.399 5.5
30 2.28 0.694 3.2
50 2.95 0.899 2.5
88 3.93 1.20 1.8
100 4.19 1.28 1.7
108 4.36 1.33 1.7
150 5.16 1.57 1.4
174 5.56 1.70 1.3
200 5.98 1.82 1.2
300 7.36 2.24 1.0
400 8.54 2.60 0.85
450 9.08 2.77 0.80
500 9.59 2.92 0.75
512 9.71 2.96 0.74
600 10.5 3.21 0.69
700 11.4 3.48 0.63
800 12.3 3.74 0.59
850 12.7 3.86 0.57
890 13.0 3.95 0.56
900 13.0 3.98 0.55
950 13.4 4.09 0.54
960 13.5 4.11 0.54
1000 13.8 4.20 0.52
1200 15.2 4.63 0.48
1400 16.5 5.02 0.44
1600 17.7 5.39 0.41
1800 18.8 5.75 0.38
1900 19.4 5.91 0.37
2000 19.9 6.08 0.36
2200 21.0 6.40 0.34
2400 22.0 6.71 0.33
2600 23.0 7.01 0.32
2800 23.9 7.30 0.30
3000 24.9 7.58 0.29
3400 26.6 8.11 0.27
6000 36.5 11.1 0.20
8000 43.0 13.1 0.17
10000 48.9 14.9 0.15
12000 54.3 16.6 0.14
16000 64.4 19.6 0.11

Attenuation values are typical at ambient temperature +20ºC (+68ºF). Power rating ambient temperature +40ºC (+104ºF), inner conductor +100ºC (+212ºF).

MECHANICAL CHARACTERISTICS
Weight 0.12 kg/m (0.08 lb/ft)
Maximum pulling force 790 N (177 lb)
Minimum bending radius
• Single bending 40 mm (1.6 in)
• Repeated bending 100 mm (3.9 in)
Operating temperature range -55…+80°C (-67…+176ºF)
Crush resistance 1.9 kg/mm (106 lb/in)
Bending moment 1.8 Nm (1.3 lb-ft)
Recommended clamp spacing 0.6 m (2 ft)
STANDARD DRUM
Cable type Drum Standard length m (ft) Outer diam.(D) cm (in) Outer width cm (in) Drum weight (W) kg (lb) Total weight (empty) kg (lb) Drum freight volume m3(cu.ft)
RFA 1/4” P6D 500 (1640) 63 (25) 51 (20) 13 (29) 83 (183) 0.20 (7.06)
CODES FOR NKC CONNECTORS
Connector type Code
N male NKC1014300
N female NKC1014400
7-16 male NKC1014100
N male Right angle NKC1014600

UCFIBRE® MTC SERIES

36 & 48 Cores, COMPACT Indoor Tight Buffer Distribution Cable, LSZH

Overview

Compact design version of MT Series with reduced overall diameter for easier installation and space limitation environment.

Aditional Option

  • PVC Sheath
  • PE Sheath for outdoor applications
  • Steel Wire Braidling for armouring protection

Features

  • Tight buffer: Each fibre is coated to 0.9mm with LSZH
  • Strength Member: Aramid yarn
  • Core Wrapping: Polyester tape
  • Outer Sheath: LSZH compliant to IEC 61034, IEC 60754 – 1&2, IEC 60332 -1& 60332 –3- 24
  • Suitable for Indoor Flame Retardant Environment.
  • Up to 40% more compact & lighter than standard indoor types but with lesser tensile load.
Main Characteristics
Test Standard Value Sanction*
Maximum installation load (a few hours) IEC 60794-1-2-E1 1300 N (36F,48F) Fibre strain, ≤ 0.6%,∆α reversible
Short term tensile strength. (some days) IEC 60794-1-2-E1 1300 N (36F,48F) Fibre strain, ≤ 0.4%,∆α reversible
Max operation tension IEC 60794-1-2-E1 400 N (36F, 48F) Fibre strain, ≤ 0.2%,∆α≤ 0.4 db(MM), ≤0.30(SM)
Crush (short term) IEC 60794-1-2-E3 1000N/100mm ∆α ≤ 0.4 dB(MM), ≤0.30(SM), no damage
Temperature range IEC 60794-1-2-F1 -20->+70◦C ∆α≤ 0.6 dB/km(MM), ≤0.30 db/km(SM)

* Values for multi-mode fibres, all optical measurements performed at 1300 nm

Values for single-mode fibres, all optical measurements performed at 1550 nm

Technical Data:
No. of fibres  36 48
Design 6×6 TB 4×12 TB
Tight buffer Size mm 0.9±0.05 0.9±0.05
Outer sheath thickness mm 1.2 nominal 1.2 nominal
Cable Outer Diameter mm 11.0±1.5 12±1.5
Cable Weight mm 100 140
Min. bending radius Kg/km Without Tension
10×Cable-Ф		 Under Maximum Tension 20×Cable-Ф
Temperature range â—¦C
Installation
-10 – > + 60;		 Transport & Storage
-40 – > + 70;		 Operation -20->+70
Flame Retardant IEC 60332 – 3 -24(3C)
Ordering Information
UCFIBREâ„¢ MTC SERIES FO Cable part numbers are made up using the table below.

The part number always starts with the letters MTC to denote that it is a UCFIBREâ„¢ MTC SERIES FO Cable. This is followed by 3 numbers which symbolises the core quantity and then 2 letters to denote the fibre type.

Example of a UCFIBREâ„¢ MTC SERIES FO Cable part number:

MTC048M4

The above example describes an OM4 (50um, Aqua Sheath) UCFIBREâ„¢ MTC SERIES FO Cable, with 48 cores.

MTC SERIES CORE QUANTITY FIBRE TYPE
MTC XXX XX
036 – 36 CORES

048 – 48 CORES

 

 SM – SINGEMODE, G652D, 9um (yellow sheath)

M1 – OM1, 62.5um (orange sheath)

M2 – OM2, 50um (orange sheath)

M3 – OM3, 50um (aqua sheath)

M4 – OM4, 50um (aqua sheath)

MPO/MTP® Hydra Cable Assemblies

Indoor, LSZH, Low Loss, MTP® or MPO

Overview

  • Material of cable sheath is Low Smoke Halogen Free
  • Fibre Type: Please refer to technical datasheet
Technical Specification
Item Technical Parameters
Connector Type MPO/MTP® LC/SC
Max. Insertion Loss 0.50dB (MM)

0.75dB (SM)

 0.25dB (MM)

0.30dB (SM)
Min. Return Loss 26dB (MM)

45dB (SM – UPC)

55dB (SM – APC)

 30dB (MM)50dB (SM – UPC)

65dB (SM – APC)

Note: The insertion loose based on above value need to plus fiber attenuation.

  • MTP® is a registered MPO connector, Trademark of USCONEC
  • Low loss fibres or Draka BendBright™ fibres are used for better insertion
    loss requirements when needed.
  • Factory Terminated and Component Tested
Ordering Information
Please contact our local offices for more details or refer to technical datasheet available below

MTP®/MPO Pre-Terminated Trunk Cable

Indoor, LSZH, Low Loss, MTP® or MPO

  • MTP® is a registered MPO connector, Trademark of USCONEC
  • Low loss fibres or Draka BendBright™ fibres are used for better insertion
    loss requirements when needed.
  • Factory Terminated and Component Tested

Overview

  • Female (Standard) & Male MTP Connectors.
  • Type A , B and C available.
  • Factory Terminated and Tested.
  • Lightweight & High density
  • Sheath : Flame Retardant LSZH
Technical Specification
Item Technical Parameters
Connector Type Max. Insertion Loss Min. Return Loss
 MPO/ MTP ™ MM : 0.50dB ; 0.35dB (Low Loss)

SM : 0.75d ; 0.35dB (Low Loss)

 MM : 26 dB

SM : 45 dB (UPC) ; 55dB (APC)

Note: The insertion loose based on above value need to plus fiber attenuation.

Ordering Information
Please contact our local offices for more details or refer to technical datasheet available below.

UC Future C22 Cat8.2 S/FTP 4PR LSZH

Standard, Solid, LSZH, 22AWG, Screened.

Construction
Conductor Bare copper wire, Nom. ø 0.64 mm (AWG22)
Insulation Foam-Skin PE
Twisting 2 cores to the pair
Cable lay up 4 pairs
Pair Screen Al-laminated Plastic Foil around each pair
Overall screen Tinned Copper Braid
Sheath LSZH
Outer diameter Nom. 8.5 mm
Mechanical properties
Bending radius Installation ≥ 8 X OD
Installed ≥ 4 X OD
Temperature range During operation -20°C to + 60°C
During installation   0°C to + 50°C
Electrical properties
DC loop resistance  110 Ω
Insulation resistance (500 V) ≥ 5000 MΩ.km
Nominal Mutual Capacitance Nom. 43 pF/m
Mean Characteristic Impedance @ 100 MHz 100 Ω
Nominal velocity of propagation Nom. 79%
Max. Delay skew 12 ns/100 m
Transfer Impedance At 1 MHz 5 mΩ/m
Coupling Attenuation 85 dB
Attenuation @ 2000 Mhz 78.1 dB
NEXT @ 2000 Mhz 75.0 dB
PS-NEXT @ 2000 Mhz 72.0 dB

Application

  • Primary (Campus)
  • Secondary (Riser)
  • Tertiary (Horizontal)
  • IEEE 802.3: 10Base-T, 100Base-T,1000Base-T, 10GBase-T; 40GBase-T ,ISDN, TPDDI, ATM, CATV,Breitband-Video, SOHO-Cabling
  • Power over Ethernet PoE/PoE+
  • IEEE 802.3af and IEEE 802.3at

Standards

  • ISO / IEC 11801 2nd Ed
  • IEC 61156-5 2nd Ed

Flame Retardant

  • LSHF-FR IEC 60332-1-2; IEC 60332-3-24
Ordering Information
SAP IC Product Description P.U
60030331 UC FUTURE COMPACT22 Cat.8.2 S/FTP 4P LSHF-FR Dca 500m/reel

UC1500 HS22 Cat.7A S/FTP

Standard, Solid, LSZH

Construction
Conductor Bare copper wire, Nom. ø 0.62 mm (AWG22/1)
Insulation Foam-Skin Polyethylene
Twisting 2 cores to the pair
Pair Screen Al-laminated plastic foil around each pair
Cable Lay Up 4 Pairs
Screen Tinned Copper Braid
Sheath LSZH
Outer Diameter Nom 7.6mm
Weight Nom 63.7 kg/km
Mechanical properties
Bending radius without load ≥8 X OD
with load ≥ 4 X OD
Temperature range during operation -20°C to + 60°C
during installation 0°C to + 50°C
Electrical properties at 20°C ± 5°C
Loop resistance 128 Ω/km
Insulation resistance (500 V) 5000 MΩ.km
Mutual capacitance at 800 Hz Nom. 43 pF/m
Characteristic impedance @ 100 MHz Nom. 100Ω
Nominal velocity of propagation 79 %
Propagation delay 427 ns/100m
Delay skew 12 ns/100m
Transfer impedance At 10 MHz  10mΩ/m
Coupling attenuation  80 dB
Attenuation @ 1500 Mhz 64.3 dB
NEXT @ 1500 Mhz 80.0 dB
PS-NEXT @ 1500 Mhz 77.0 dB
ACR @ 1500 Mhz 16.0 dB
PS-ACR @ 1500 Mhz 13.0 dB
PS-ACR-F @ 1500 Mhz 25.0 dB

Application

  • Primary (Campus)
  • Secondary (Riser)
  • Tertiary (Horizontal)
  • IEEE 802.3: 10Base-T; 100Base-T; 1000Base-T;10GBase-T
  • 1000Base-T, 10GBase-T; IEEE 802.5, ISDN, TPDDI, ATM, CATV,Broadband Video
  • Power over Ethernet (PoE) / PoE+
  • IEEE 802.3af and IEEE 802.3at

Standards

  • ISO / IEC 11801 2nd Ed
  • IEC 61156 2nd Ed
  • EN 50173; EN 50288-9-1

Fire Rating

  • LSZH IEC 60332-1
Ordering Information
SAP IC Product Description P.U
60088553 UC 1500 HS22 Cat.7A S/FTP, Individual pair foil, Copper Braid, LSZH 500m/reel