UCFIBRE™® UT SERIES |

UCFIBRE™® UT SERIES

2-12 Cores, Light Armoured, Uni-tube Cable, PE Sheath

Features

Unitube: Thermoplastic material, containing up to 12 fibres and filled with a
suitable water tightness compound
Peripheral Strength Elements: Aramid yarns
Armour: Corrugated steel tape
Outer Sheath: PE
Suitable for Duct Buried or Outdoor Installation

Standards

ANSI/TIA-568-C.3, ISO/IEC 11801, IEC 60794-3-10

Main characteristics
Test	Standard	Value	Sanction*
Maximum Tension at installation (short term)	IEC 60794-1-2-E1	1200N	ΔI /l fibre ≤ 0.6%, Δα reversible
Maximum Tension at installation (Long term)	IEC 60794-1-2-E1	800 N	ΔI /l fibre ≤ 0.2%, Δα reversible
Crush (short/long term)	IEC 60794-1-2-E3	1500N /100mm	Δα ≤ 0.3 dB (MM) , Δα ≤ 0.1 dB (SM); cable integrity
Temperature range	IEC 60794-1-2-F1	-20°C -> +70°C

*values for single-mode fibres, all optical measurements performed at 1550 nm
*values for multi-mode fibres, all optical measurements performed at 1300 nm

Overview

UT Series is excellent robust
installations that enables flexible
bending radius but till provide
adequate mechanical protection in
exposed installation environment,
ie outside buildings facilities.

Additional Options

UV Resistance

Technical data

No. of Fibres

2, 4, 6, 8, 12

Design

1x12

Loose Tube / Filler - ∅

3.0 nominal

Sheath thickness

1.5 nominal

Cable Diameter

8.1± 0.5

Cable Weight

kg / km

Max installation tension

1200

Min. bending radius

Without Tension
10 x Cable ø

Under Maximum Tension
20 x Cable ø

Temperature range

°C

Installation
-10°C -> +60°C;

Transport. & Storage
-40°C -> +70°C ;

Operation
-20°C -> +70°C

Flame Retardant

Ordering Information
UCFIBRE UT SERIES FO Cable part numbers are made up using the table below.The part number always starts with the letters UT to denote that it is a UCFIBRE UT SERIES FO Cable. This is followed by 3 numbers which symbolizes the core quantity and then 2 letters to denote the fibre type.Example of a UCFIBRE UT SERIES FO Cable part number: UT006M2 The above example describes an OM2 (50um, Orange Sheath) UCFIBRE UT SERIES FO Cable, with 6 cores.

Ordering Information

UCFIBRE UT SERIES FO Cable part numbers are made up using the table below.The part number always starts with the letters UT to denote that it is a UCFIBRE UT SERIES FO Cable. This is followed by 3 numbers which symbolizes the core quantity and then 2 letters to denote the fibre type.Example of a UCFIBRE UT SERIES FO Cable part number:

UT006M2

The above example describes an OM2 (50um, Orange Sheath) UCFIBRE UT SERIES FO Cable, with 6 cores.

UT	XXX	XX
UTM SERIES	CORE QUANTITY	FIBRE TYPE
	002 : 2 cores 004 : 4 cores 006 : 6 cores	SM - SINGEMODE, G652D, 9um (Yellow sheath) M1 - OM1, 62.5um (Orange sheath) M2 - OM2, 50um (orange sheath) M3 - OM3, 50um (aqua sheath) M4 - OM4, 50um (aqua sheath)

Download

Products