UCFIBRE™® MTV SERIES

2-24 Cores, Indoor Tight Buffer Distribution Cable, PVC OFNR Sheath

 

Overview

One of the most widely used UCFIBRE™® Indoor cable, MTV series is excellent for indoor installation that provides a safe setup against flame propagation and its flexible, yet robust construction makes installation at ease.

Additional Options

  • Steel Wire Braiding for armouring protection

Features

  • Tight buffer: Each fibre is coated to 0.9mm with PVC
  • Strength Member : Aramid yarn
  • Outer Sheath: PVC UL1651
  • Suitable for indoor installation requiring flame retardant
Main Characteristics
Test Standard Value Sanction*
Short term tension IEC 60794-1-2-E1 660 N (2F-12F),
1200N (24F)
Fibre strain ≤ 0.6%,Δα reversible
Max operation tension IEC 60794-1-2-E1 198N (2F-12F),
340N (24F)
Fibre strain ≤ 0.2%,Δα ≤0.4 db (MM),  ≤0.3db (SM)
Crush (short term) IEC 60794-1-2-E3 1000 N / 100mm Δα ≤0.4 db (MM),  ≤0.3db (SM), no damage
Temperature range IEC 60794-1-2-F1 -20 -> +70°C Δα ≤ 0.6 dB /km(MM),
Δα ≤ 0.40dB/km (SM)

* value of multi mode fibres, all optical measurements perform at 1300nm
* value of single mode fibres, all optical measurements perform at 1550nm

Technical Data
No. of Fibres   2,4,6 8 12 24
Design   1×2,4,6 TB 1×8 TB 1×12 TB 1×24 TB
Tight buffer mm 0.9 ± 0.05 0.9 ± 0.05 0.9 ± 0.05 0.9 ± 0.05
Cable Nom. Diameter mm 4.8 5.4 6.2 8.8
Cable Nom. Weight kg/km 20 26 33 60
Min. bending radius   Without Tension
10 x Cable Ø
Under Maximum Tension
20 x Cable Ø
Temperature range °C
Installation
-10 -> +60
Transport. & Storage
-40 -> +70
Operation
-20  -> +70
Flame Retardant    UL 1651
Ordering Information
UCFIBRE™® MTV SERIES FO Cable part numbers are made up using the table below. The part number always starts with the letters MTV to denote that it is an UCFIBRE™® MTV SERIES FO cable. This is followed by 3 numbers which symbolizes the core quantity and then 2 letters yo denote the fibre type. Example of a UCFIBRE™® MTV SERIES FO Cable part number: MTV008M1 The above example describes an OM1(62.5Sum, Orange Sheath) UCFIBRE™® MTV SERIES FO Cable, with 8 cores.
 
MT SERIES CORE QUANTITY FIBRE TYPE
MTV XXX XX
 
002 – 2 CORES
004 – 4 CORES
006 – 6 CORES
008 – 8 CORES
012 – 12 CORES
SM – SINGEMODE, G652D, 9um (yellow sheath)
M1 – OM1, 62.5um (orange sheath)
M2 – OM2, 50um (orange sheath)
M3 – OM3, 50um (aqua sheath)
M4 – OM4, 50um (violet sheath)

UCFIBRE™® UT SERIES

2-12 Cores, Light Armoured, Uni-tube Cable, PE Sheath

Features

  • Unitube: Thermoplastic material, containing up to 12 fibres and filled with a
    suitable water tightness compound
  • Peripheral Strength Elements: Aramid yarns
  • Armour: Corrugated steel tape
  • Outer Sheath: PE
  • Suitable for Duct Buried or Outdoor Installation

Standards

  • ANSI/TIA-568-C.3, ISO/IEC 11801, IEC 60794-3-10
Main characteristics
Test Standard Value Sanction*
Maximum Tension at
installation (short term)
IEC 60794-1-2-E1 1200N  ΔI /l fibre ≤ 0.6%, Δα reversible
Maximum Tension at
installation (Long term)
IEC 60794-1-2-E1 800 N   ΔI /l fibre ≤ 0.2%, Δα reversible
Crush (short/long term) IEC 60794-1-2-E3 1500N /100mm   Δα ≤ 0.3 dB (MM) , Δα ≤ 0.1 dB (SM);        cable integrity
Temperature range IEC 60794-1-2-F1 -20°C -> +70°C  

*values for single-mode fibres, all optical measurements performed at 1550 nm
*values for multi-mode fibres, all optical measurements performed at 1300 nm


Overview

UT Series is excellent robust
installations that enables flexible
bending radius but till provide
adequate mechanical protection in
exposed installation environment,
ie outside buildings facilities.

Additional Options

  • UV Resistance
Technical data
No. of Fibres   2, 4, 6, 8, 12
Design   1×12
Loose Tube / Filler – ∅ mm 3.0 nominal
Sheath thickness mm 1.5 nominal
Cable Diameter mm 8.1± 0.5
Cable Weight kg / km 80
Max installation tension N 1200
Min. bending radius mm
Without Tension
10 x Cable ø
Under Maximum Tension
20 x Cable ø
Temperature range °C Installation
-10°C -> +60°C;
Transport. & Storage
-40°C -> +70°C ;
Operation
-20°C -> +70°C
Flame Retardant  
NA
Ordering Information
UCFIBRE UT SERIES FO Cable part numbers are made up using the table below.The part number always starts with the letters UT to denote that it is a UCFIBRE UT SERIES FO Cable. This is followed by 3 numbers which symbolizes the core quantity and then 2 letters to denote the fibre type.Example of a UCFIBRE UT SERIES FO Cable part number:

 

UT006M2

The above example describes an OM2 (50um, Orange Sheath) UCFIBRE UT SERIES FO Cable, with 6 cores.

 

 

UTM SERIES CORE QUANTITY
FIBRE TYPE
UT XXX XX
  002 : 2 cores
004 : 4 cores
006 : 6 cores
SM – SINGEMODE, G652D, 9um (Yellow sheath)
M1 – OM1, 62.5um (Orange sheath)
M2 – OM2, 50um (orange sheath)
M3 – OM3, 50um (aqua sheath)
M4 – OM4, 50um (aqua sheath)
 

 

UCFIBRE™® LTFIM SERIES

2-144 Cores, LTFIM Series Fire Resistant Non-Metallic LSZH Cable

Features

  • Central strength member: FRP with PE coating when needed
  • Tube:thermoplastic material, containing up to 12 optical fibres and filled with a suitable water tightness compound
  • Stranding:The required numbers of elements (tubes or fillers) are SZ stranded
    around the central strength member
  • Longitudinal Water Tightness:water-blocking tape & yarns (dry core) and
    fire resistant layer
  • Outer Sheath: LSZH. Flame Retardant to IEC 60332-3C
  • Suitable installation is indoor and indoor/outdoor in and between public buildings, in tunnels, metro lines and other places where need very high degree of fire safety and support for critical communication, UV resistant.
Main characteristics
Test Standard Value Sanction*
Max. installation tension IEC 60794-1-2-E1 2700N fibre strain < 0.6%,
± reversible
Crush(short term) IEC 60794-1-2-E3 1500 N / 100mm < 0.3 dB(MM), 0.1 dB(SM)
Temperature range IEC 60794-1-2-F1 -40 -> +70°C < 0.3 dB/km(MM),
0.1 dB/km(SM)
Water Penetration IEC 60794-1-2-F5C sample=3m,
water=1m
No water leakage after 24 hour

*values for single-mode fibres, all optical measurements performed at 1550 nm
*values for multi-mode fibres, all optical measurements performed at 1300 nm

Overview

LTFIM Series offers cost efficience non-metallic LSZH cable. LTFIM Series is able to be deployed indoor/outdoor in and between public buildings, in tunnels, metro lines and other places where need very high degree of fire safety and support for critical communication

Fire Resistance

  • BS 6387 (180 min. at 950°C)
  • IEC 60331-25 (90 min. at 750°C)

Flame Retardant

  • IEC 60332-1
  • IEC 60332-3C
Technical data
No. of Fibres 2~72 96 144
Design (Elements x Fibres per Tube) 6×12 8×12 12×12
Loose Tube / Filler – OD mm 2.3 2.3 2.3
CSM/sheath diameter mm 3.0 3.0/4.8 3.0/8.4
Outer sheath thickness mm 2.0 nominal 2.0 nominal 2.0 nominal
Cable Diameter mm 13.0 nominal 14.8 nominal 18.4 nominal
Cable Weight kg / km 186 237 364
Max installation tension N 2700
Min. bending radius mm
Without Tension:
10 x Cable OD
Under Maximum Tension:
20 x Cable OD
Temperature range °C Installation:
-10°C -> +60°C
Transport. & Storage:
-40°C -> +70°C
Operation:
-40°C -> +70°C
Flame Retardant IEC 60332-3-24
Fire Resistance BS 6387 & IEC60331-25
Ordering Information
UCFIBRE™® LTFIM SERIES FO Cable part numbers are made up using the table below.The part number always starts with the letters LTFIM to denote that it is a UCFIBRE LTFIM SERIES FO Cable. This is followed by 3 numbers which symbolises the core quantity and then 2 letters to denote the fibre type. Example of a UCFIBRE LTFIM SERIES FO Cable part number:

LTFIM040M2

The above example describes an OM2 (50um, Orange Sheath) UCFIBRE LTFIM SERIES FO Cable, with 40 cores.

LTFIM SERIES CORE QUANTITY
FIBRE TYPE
LTFIM XXX XX
012 – 12 CORES024 – 24 CORES036 – 36 CORES

048 – 48 CORES

096 – 96 CORES

SM – SINGLEMODE, G652D, 9um (yellow sheath)M1 – OM1, 62.5um (orange sheath)M2 – OM2, 50um (orange sheath)

M3 – OM3, 50um (aqua sheath)

M4 – OM4, 50um (aqua sheath)

UCFIBRE™® LTFMSMNWM Series

2-48 Cores SWA, Nylon + LSZH Sheath,

Features

  • Central strength member (CSM): glass fibre reinforced plastic material (FRP) with plastic coat when needed.
  • Tube: Thermoplastic material, containing up to 12 optical fibres and filled with a suitable water tightness compound.
  • Stranding: The required numbers of elements (tubes or fillers) are SZ stranded around the central strength member.
  • Core Wrapping: polyester tape (jelly filled)
  • Inner Sheath: LSZH
  • Inner Armour: Corrugated steel tape
  • Middle Sheath: LSZH
  • Nylon sheath: Black Nylon Polyamide 12 (PA 12)
  • Outer Armour: Galvanized steel wire. WB jelly filled,
  • Outer Sheath: LSZH flame retardant to IEC 60332-3C
  • Suitable for Direct Buried, Rodent /Termite. Flame retardant to LSZH to IEC 60332-3C, 61034 & 60754-1&2
Main characteristics
Test Standard Value Sanction*
Max. installation
tension
IEC 60794-1-2-E1 6000 N No visible fibre strain,
Δα≤ 0.05 dB
Crush IEC 60794-1-2-E3 400N / 100mm Δα≤0.3 dB(MM), 0.05 dB(SM)
Impact IEC 60794-1-2-E4 30 Nm, 3 impacts, r=300mm Δα≤0.3 dB(MM),
0.05 dB(SM)
Temperature Cycling EC 60794-1-2-F1 -40 -> +70°C Δα≤0.3 dB/km(MM),
0.05 dB/km(SM)
Water Penetration IEC 60794-1-2-F5B sample=3m, water=1m No water leakage after 24 hour

*values for single-mode fibres, all optical measurements performed at 1550 nm
*values for multi-mode fibres, all optical measurements performed at 1300 nm

Overview

This cable is especially designed for harsh
environments. The double armour
combination of corrugated steel tape and
galvanized steel provide superior crush
protection to the fibers. Water tightness
compound within loose tube reinforced by
polyster tape and jelly protects the fibers
against corrosion and moisture.

Additional Options

  • IEC 60332-1, IEC 60332-24, IEC 61034-2, IEC 60754-1/2
Technical Data
No.of Flbres 2, 4, 8,16 6, 12 24, 36, 48
Design (Elements x Fibres per Tube) 5×4 5×6 5×12
Loose Tube / Filler – Ø mm
Nom. 2.0
CSM/sheath diameter mm
Nom. 1.5
Outer sheath thickness mm
Nom. 0.8
Middle sheath thickness mm
Nom. 1.0
Nylon sheath thickness mm
Nom. 0.4
Galvanized steel wire mm
Nom. 1.0
Outer sheath thickness mm
Nom. 1.9
Cable Diameter mm
Nom. 18.9
Cable Weight kg / km
580
Max installation tension N
6000
Min. bending radius mm
Without Tension
15 x Cable ∅
Under Maximum Tension
25 x Cable ∅
Temperature range °C
Installation
-5 -> +50;
Transport. & Storage
-40 -> +70 ;
Operation
-40 -> +70
Ordering Information
UCFIBRE™® LTFMSMNWM SERIES FO Cable part numbers are made up using the table below.
The part number always starts with the letters LTFMSMNWM to denote that it is a UCFIBRE™® LTFMSMNWM SERIES FO Cable. This is followed by 3 numbers
which symbolizes the core quantity and then 2 letters to denote the fibre type.
Example of a UCFIBRE™® LTFMSMNWM SERIES FO Cable part number:
LTFMSMNWM08M1
The above example describes an OM1 (62.5um, Orange Sheath) UCFIBRE™® LTFMSMNWM SERIES FO Cable, with 8 cores.

LTFMSMNWM SERIES CORE QUANTITY
FIBRE TYPE
LTFMSMNWM XXX XX
002 – 2 CORES
004 – 4 CORES
006 – 6 CORES
008 – 8 CORES
012 – 12 CORES
024 – 24 CORES
036 – 36 CORES
048 – 48 CORES
SM – SINGLEMODE, G652D, 9um (yellow sheath)
M1 – OM1, 62.5um (orange sheath)
M2 – OM2, 50um (orange sheath)
M3 – OM3, 50um (aqua sheath)
M4 – OM4, 50um (aqua sheath)

UCFIBRE™® LTFMSMWM Series

2 ~ 72 Fibres, SWA, Heavy Armoured Cable, LSZH Sheath

Overview

This cable is especially designed for harsh
environments. The double armour
combination of corrugated steel tape and
galvanized steel provide superior crush
protection to the fibers.

Additional Options

  • IEC 60332-1, IEC 60332-24, IEC 61034-2, IEC 60754-1/2

Features

  • Central strength member (CSM): glass fibre reinforced plastic material (FRP) with plastic coating when needed.
  • Tube: Thermoplastic material, containing up to 12 optical fibres and filled with a suitable water tightness compound.
  • Stranding: The required numbers of elements (tubes or fillers) are SZ stranded around the central strength member.
  • Core Wrapping: polyester tape (jelly filled)
  • Inner Sheath: LSZH
  • Inner Armour: Corrugated steel tape
  • Middle Sheath:LSZH
  • Outer Armour: Galvanized steel wire. WB jelly filled, wrapped with cotton tape
  • Outer Sheath: LSZH
  • Suitable for Direct Buried, Rodent.Flame retardant to IEC 60332-3C. LSZH to IEC 61034 & IEC 60754-1&2.
Main characteristics
Test Standard Value Sanction*
Max. installation
tension
IEC 60794-1-2-E1 6000 N No visible fibre strain,
Δα≤ 0.05 dB
Crush IEC 60794-1-2-E3 400N / 100mm Δα≤ 0.3 dB(MM), 0.05 dB(SM)
Impact IEC 60794-1-2-E4 30 Nm, 3 impacts, r=300mm Δα≤ 0.3 dB(MM), 0.05 dB(SM)
Temperature Cycling EC 60794-1-2-F1 -30 -> +70°C Δα≤ 0.3 dB/km(MM),
0.05 dB/km(SM)
Water Penetration IEC 60794-1-2-F5B sample=3m, water=1m No water leakage after 24 hour

* Values for multi-mode fibres, all optical measurements performed at 1300 nm

*Values for single-mode fibres, all optical measurements performed at 1550 nm

Technical Data
No.of Flbres 6,12 24,36,48 72
Design (Elements x Fibres per Tube) mm 5×6 5×12 6×12
Loose Tube / Filler mm 2.0
CSM/sheath diameter mm 1.5 1.5 2.2
Outer sheath thickness mm 1.9
Cable Diameter mm Nom. 17.2 Nom.17.2 Nom.17.9
Cable Weight kg / km 518 518 548
Max installation tension N
6000
Min. bending radius mm
Without Tension
15 x Cable ∅
Under Maximum Tension
20 x Cable ∅
Temperature range °C Installation
-5 -> +50;
Transport. & Storage
-40 -> +70 ;
Operation
-30 -> +70
Ordering Information
UCFIBRE™® LTFMSMWM SERIES FO Cable part numbers are made up using the table below.The part number always starts with the letters LTFMSMWM to denote that it is a UCFIBRE™® LTFMSMWM SERIES FO Cable. This is followed by 3 numbers which symbolizes the core quantity and then 2 letters to denote the fibre type. Example of a UCFIBRE™® LTFMSMWM SERIES FO Cable part number:
LTFMSMWM08M1The above example describes an OM1 (62.5um, Orange Sheath) UCFIBRE™® LTFMSMWM SERIES FO Cable, with 8 cores.

LTFMSMWM
SERIES
CORE QUANTITY
FIBRE TYPE
LTFMSMWM XXX XX
002 – 2 CORES
004 – 4 CORES
006 – 6 CORES
008 – 8 CORES
012 – 12 CORES
024 – 24 CORES
036 – 36 CORES
048 – 48 CORES
072 – 72 CORES
SM – SINGLEMODE, G652D, 9um (yellow sheath)
M1 – OM1, 62.5um (orange sheath)
M2 – OM2, 50um (orange sheath)
M3 – OM3, 50um (aqua sheath)
M4 – OM4, 50um (aqua sheath)

UCFIBRE™® LTFGP SERIES

4-144 Cores, Non Metallic Armoured Rodent Resistant Cable,HDPE Sheath

Features

  • Central strength member (CSM): glass fibre reinforced plastic material (FRP) with plastic coating when needed.
  • Tube: thermoplastic material, containing up to 12 optical fibres and filled with a suitable water tightness compound.
  • Stranding: The required numbers of elements (tubes or fillers) are SZ stranded around the central strength member.
  • Longitudinal Water Tightness: WB jelly and water blocking yarn (partial jelly filled).
  • Peripheral reinforcement: glass yarns.
  • PE Outer Sheath: HDPE with rodent repellent additive.
Main characteristics
Test Standard Value Sanction*
Max. installation
tension
IEC 60794-1-2-E1 1500 N fibre strain ≤ 0.33%,
Δα reversible
Crush (short term) IEC 60794-1-2-E3 1000N / 100mm Δα ≤ 0.3 dB(MM), 0.1 dB(SM)
Temperature range IEC 60794-1-2-F1 -3 0 -> +70°C Δα ≤ 0.3 dB/km(MM),
0.1 dB/km(SM)
Water Penetration IEC 60794-1-2-F5B sample=3m, water=1m No water leakage after 24 hour

*values for single-mode fibres, all optical measurements performed at 1550 nm
*values for multi-mode fibres, all optical measurements performed at 1300 nm

Overview

LTZMSM Series offer better
mechanical protection than LTZSM
Series and is able to be deployed in
exposed environment over short
distances reducing the reliability of
ducts and hence better cost efficiency.

Additional Options

  • LSZH Sheath (LTFGM Series)
  • Steel Wire Armouring
  • UV Resistance
  • Anti Rodent & Termite addictives
Technical Data
No.of Flbres 6,12, 24 36,48,72 144
Design (Elements x Fibres per Tube) mm 6×6 6×12 12×12
Loose Tube / Filler – Ø mm 1.8 2.1 2.1
CSM/sheath diameter mm 2.0 2.3 2.7/6.6
Outer sheath thickness mm Nom. 1.5 Nom.1.5 Nom. 1.5
Cable Diameter mm Nom. 9.9 Nom. 10.6 Nom. 14.6
Cable Weight kg / km 87 99 175
Max installation tension N
1500
Min. bending radius mm
Without Tension
10 x Cable ø
Under Maximum Tension
20 x Cable ø
Temperature range °C Installation
-10 -> +60;
Transport. & Storage
-40 -> +70 ;
Operation
-40 -> +70
Ordering Information
UCFIBRE™® LTFGP SERIES FO Cable part numbers are made up using the table below.The part number always starts with the letters LTFGP to denote that it is a UCFIBRE™® LTFGP SERIES FO Cable. This is followed by 3 numbers which symbolizes the core quantity and then 2 letters to denote the fibre type. Example of a UCFIBRE™® LTFGP SERIES FO Cable part number:LTFGP008M4

The above example describes an OM4 (50um, Orange Sheath) UCFIBRE™® LTFGP SERIES FO Cable, with 8 cores.

LTFGP
SERIES
CORE QUANTITY
FIBRE TYPE
LTFGP XXX XX
012 – 12 CORES 024 – 24 CORES 036 – 36 CORES 048 – 48 CORES 096 – 96 CORES

144 – 144 CORES

SM – SINGLEMODE, G652D, 9um (yellow sheath)M1 – OM1, 62.5um (orange sheath)M2 – OM2, 50um (orange sheath)

M3 – OM3, 50um (aqua sheath)

M4 – OM4, 50um (aqua sheath)

UCFIBRE™® LTZSM SERIES

4-144 Cores, Light Armoured Cable, LSZH Sheath


Overview

LTZSM Series is one of the most value
for cost UC FIBRE™® cable which is able to
run outdoor into indoor premises with
protection against harsh elements
ie Water / UV / Mechanical stress,
while ensuring safety flame standards
are in place.

Optional

  • PE Sheath (LTZSP)
  • PE Sheath for outdoor applications
  • Steel Wire Braiding for armouring protection

Features

  • Central strength member (CSM): Steel wire with plastic coating when needed
  • Tube: Thermoplastic material, containing up to 12 optical fibres and filled with a suitable water tightness compound
  • Stranding: The required numbers of elements (tubes or fillers) are SZ stranded
    around the central strength member
  • Longitudinal Water Tightness: WB jelly and water blocking yarn (partial jelly filled)
  • Armour: Corrugated steel tape
  • Outer Sheath: LSZH
  • Suitable for Duct Buried or Indoor/Outdoor Installation
Main characteristics
Test Standard Value Sanction*
Max. installation tension IEC 60794-1-2-E1 3000N fibre strain ≤ 0.33%, Δα reversible
Crush(short term) IEC 60794-1-2-E3 3000 N / 100mm Δα ≤ 0.3 dB(MM), 0.1 dB(SM)
Temperature range IEC 60794-1-2-F1 -40 -> +70°C Δα ≤ 0.3 dB/km(MM),
0.1 dB/km(SM)
Water Penetration IEC 60794-1-2-F5B sample=3m, water=1m No water leakage after 24 hour

* Values for multi-mode fibres, all optical measurements performed at 1300 nm

* Values for single-mode fibres, all optical measurements performed at 1550 nm

Technical data
No. of Fibres 6, 12, 24 36, 48 96
Design (Elements x Fibres per Tube) 6×6 6×12 8×12
Loose Tube / Filler mm 1.8 2.0 2.0
CSM/sheath diameter mm 2.0 2.2 2.0/3.5
Outer sheath thickness mm Nom.1.8
Cable Diameter mm Nom. 11.0 Nom. 11.6 Nom. 12.9
Cable Weight kg / km 161 177 205
Max installation tension N 3000
Min. bending radius mm
Without Tension
10 x Cable ø
Under Maximum Tension
20 x Cable ø
Temperature range °C Installation
-10 -> +60;
Transport. & Storage
-40 -> +70 ;
Operation
-40 -> +70
Flame Retardant IEC 60332-3-24
Ordering Information
UCFIBRE™® LTZMSM SERIES FO Cable part numbers are made up using the table below. The part number always starts with the letters LTZSM to denote that it is a UCFIBRE™® LTZSM SERIES FO Cable. This is followed by 3 numbers which symbolizes the core quantity and then 2 letters to denote the fibre type. Example of a UCFIBRE™® LTZSM SERIES FO Cable part number:

LTZSM008M2

The above example describes an OM2 (50um, Orange Sheath) UCFIBRE™® LTZSM SERIES FO Cable, with 8 cores.

LTZSM
SERIES
CORE QUANTITY
FIBRE TYPE
LTZSM XXX XX
012 – 12 CORES      024 – 24 CORES            036 – 36 CORES      048 – 48 CORES144 – 144 CORES SM – SINGLEMODE, G652D, 9um (yellow sheath)M1 – OM1, 62.5um (orange sheath)M2 – OM2, 50um (orange sheath)

M3 – OM3, 50um (aqua sheath)

M4 – OM4, 50um (aqua sheath)

UCFIBRE™® LTZMSM SERIES

4-144 Cores, Double Sheath Armoured Cable, LSZH

Features

  • Central strength member: Steel wire with plastic coating when needed
  • Tube: Thermoplastic material, containing up to 12 optical fibres and filled with a suitable water tightness compound
  • Stranding: The required numbers of elements (tubes or fillers) are SZ stranded
    around the central strength member
  • Longitudinal Water Tightness: Polyester tape (jelly filled)
  • Inner Sheath: LSZH
  • Armour: Corrugated steel tape
  • Outer Sheath: LSZH. Flame Retardant to IEC 60332-3C
  • Suitable for Direct Buried or Indoor/Outdoor Installation.
Main characteristics
Test Standard Value Sanction*
Max. installation tension IEC 60794-1-2-E1 3000N fibre strain < 0.6%,
Δα reversible
Crush(short term) IEC 60794-1-2-E3 3000 N / 100mm Δα ≤ 0.3 dB(MM), 0.1 dB(SM)
Temperature range IEC 60794-1-2-F1 -40 -> +70°C Δα ≤ 0.3 dB/km(MM),
0.1 dB/km(SM)
Water Penetration IEC 60794-1-2-F5B sample=3m,
water=1m
No water leakage after 24 hour

*values for single-mode fibres, all optical measurements performed at 1550 nm
*values for multi-mode fibres, all optical measurements performed at 1300 nm


Overview

LTZMSM Series have better
mechanical protection than LTZSM
Series and is able to be deployed in
exposed environment over short
distances reducing the reliability of
ducts and hence better cost efficiency.

Additional Options

  • PE Sheath (LTZPSP Series)
  • Steel Wire Armouring
  • UV Resistance
  • Anti Rodent & Termite addictive
Technical data
No. of Fibres 12, 24 36, 48 96
Design (Elements x Fibres per Tube) 6×6 6 x12 8 x12
Loose Tube / Filler mm 1.8 2.0 2.0
CSM/sheath diameter mm 2.0 2.2 2.0/3.5
Nom. Inner sheath thickness mm 0.8 0.8 0.8
Nom.Outer sheath thickness mm 1.8 1.8 1.8
Nom. Cable Diameter mm 12.6 13.2 14.5
Cable Weight kg / km 215 234 271
Max installation tension N 3000
Min. bending radius mm
Without Tension
10 x Cable ∅
Under Maximum Tension
20  x Cable ∅
Temperature range °C Installation
-10 -> +60;
Transport. & Storage
-40 -> +70 ;
Operation
-40 -> +70
Flame Retardant IEC 60332-3-24
Ordering Information
UCFIBRE™® LTZMSM SERIES FO Cable part numbers are made up using the table below.The part number always starts with the letters LTZMSM to denote that it is a UCFIBRE LTZMSM™® SERIES FO Cable. This is followed by 3 numbers which symbolizes the core quantity and then 2 letters to denote the fibre type.Example of a UCFIBRE™® LTZMSM SERIES FO Cable part number: LTZMSM008M2

LTZMSM SERIES CORE QUANTITY
FIBRE TYPE
LTZMSM XXX XX
144 – 144 CORES SM – SINGLEMODE, G652D, 9um (yellow sheath)M1 – OM1, 62.5um (orange sheath)M2 – OM2, 50um (orange sheath)M3 – OM3, 50um (aqua sheath)

M4 – OM4, 50um ( Violet sheath)

UCFIBRE™® UTM SERIES

2-12 Cores, Light Armoured, Uni-tube Cable, LSZH Sheath

Features

  • Unitube: Thermoplastic material, containing up to 12 fibres and filled with a
    suitable water tightness compound
  • Peripheral Strength Elements: Aramid yarns
  • Armour: Corrugated steel tape
  • Outer Sheath: LSZH
  • Suitable for Duct Buried or Indoor/Outdoor Installation

Standards

  • ANSI/TIA-568-C.3, ISO/IEC 11801, IEC 60794-3-10, IEC 60332-3-22, IEC 60332-1, IEC60754-1/2, IEC 61034-2
Main characteristics
Test Standard Value Sanction*
Maximum Tension at
installation (short term)
IEC 60794-1-2-E1 1200N  ΔI /l fibre ≤ 0.6%, Δα reversible
Maximum Tension at
installation (Long term)
IEC 60794-1-2-E1 800 N   ΔI /l fibre ≤ 0.2%, Δα reversible
Crush (short/long term) IEC 60794-1-2-E3 1500N /100mm   Δα ≤ 0.3 dB (MM) , Δα ≤ 0.1 dB (SM);        cable integrity
Temperature range IEC 60794-1-2-F1 -20°C -> +70°C

*values for single-mode fibres, all optical measurements performed at 1550 nm
*values for multi-mode fibres, all optical measurements performed at 1300 nm


Overview

UTM Series is excellent robust
installations that enables flexible
bending radius but till provide
adequate mechanical protection in
exposed installation environment,
ie factories, outside buildings
facilities.

Additional Options

  • Steel Wire Braiding for Armouring protection
  • UV Resistance
Technical data
No. of Fibres 2, 4, 6, 8, 12
Design 1×12
Loose Tube / Filler – ∅ mm 3.0 nominal
Sheath thickness mm 1.5 nominal
Cable Diameter mm 8.1± 0.5
Cable Weight kg / km 80
Max installation tension N 1200
Min. bending radius mm
Without Tension
10 x Cable ø
Under Maximum Tension
20 x Cable ø
Temperature range °C Installation
-10°C -> +60°C;
Transport. & Storage
-40°C -> +70°C ;
Operation
-20°C -> +70°C
Flame Retardant
IEC 60332-3-22
Ordering Information
UCFIBRE UTM SERIES FO Cable part numbers are made up using the table below.The part number always starts with the letters UTM to denote that it is a UCFIBRE UTM SERIES FO Cable. This is followed by 3 numbers which symbolizes the core quantity and then 2 letters to denote the fibre type.Example of a UCFIBRE UTM SERIES FO Cable part number:

UTM006M2

The above example describes an OM2 (50um, Orange Sheath) UCFIBRE UTM SERIES FO Cable, with 6 cores.

UTM SERIES CORE QUANTITY
FIBRE TYPE
UTM XXX XX
002 : 2 cores
004 : 4 cores
006 : 6 cores
SM – SINGEMODE, G652D, 9um (Yellow sheath)
M1 – OM1, 62.5um (Orange sheath)
M2 – OM2, 50um (orange sheath)
M3 – OM3, 50um (aqua sheath)
M4 – OM4, 50um (aqua sheath)

UCFIBRE™® SM Series Simplex LSZH

SM Series Simplex LSZH

Overview

UCFIBRE™® SM series simplex is versatile indoor flame-rated cable providing unsurpassesed performance for network patching/configuration. Easily terminate into jumper/ pigtail cable assemblies. Suitable for data centre applications

Features

  • Tight buffer : Each fiber is buffered with LSZH
  • Strength Member : Aramid yarn
  • Outer Sheath : LSZH
Technical Data
No. of Fibers
1
Design Simplex
Tight Buffer Diameter mm 0.6± 0.05 0.9± 0.05 0.9± 0.05
Outer Sheath No. Thickness mm 0.25 0.35 0.50
Nom. Cable Diameter mm 1.6 2.0 3.0
Max. Installation Tension N 110
Min. bending radius
Without Tension
10 x Cable ∅
Under Maximum Tension
20 x Cable ∅
Temperature range °C
Installation

: -10 -> +60;

Transport. & Storage
-40 -> +70 ;
Operation
-20 -> +70;
Flame Retardant
LSZH: IEC 60332-1, IEC60332-3-24
Ordering Information
UCFIBRE™® SM Series Simplex FO part numbers are made up using the table below. The part number always starts with the letters SM. This is followed by 2 numbers which symbolizes the cable diameter and then 2 letters to denote the fibre type. Example of a SM part number: –

SM020M3

The above example describes an OM3 (50um), Simplex Series (LSZH jacketing), with 2.0mm cable diameter.

SIMPLEX SHEATH
CABLE DIAMETER
FIBRE TYPE
S M 02 XX
LSZH 016 – 1.6mm

018 – 1.8mm

020 – 2.0mm

024- 2.4mm

SM – SINGEMODE, G652D, 9um (yellow sheath)
A2 – G657A2, 9um (yellow sheath)
M1 – OM1, 62.5um (orange sheath)
M2 – OM2, 50um (Orange sheath, Bendbright)
M3 – OM3, 50um (Aqua sheath, Bendbright)
M4 – OM4, 50um (Violet sheath, Bendbright)