Category: Outside Plant Industrial FO Cables

FIRETUF LTFIPNWM Fire Resistance SERIES

Heavy Armoured Cable Nylon + LSZH Sheath, Chemical/Corrosive Resistant

Features

  • Central Strength Member(CSM): glass fiber reinforced plastic rod(FRP), with PE coating when needed.
  • Tube: thermoplastic material containing up to 12 optical fibres and filled with a suitable water tightness compound.
  • Fire Resistance Layer: mica tape wrapped around loose tube
  • Stranding: The required numbers of elements (tubes or fillers) are SZ stranded around the central strength member.
  • Core Wrapping: water-blocking tape & yarn (dry-core)
  • Inner sheath: HDPE
  • Nylon sheath: Black Nylon Polyamide 12 (PA 12)
  • Outer Armour: Galvanized Steel Wire
  • Outer Sheath: LSZH flame retardant
Technical Data
No.of Flbres 4,8,16 12,24,36,48,72 96
Design (Elements x Fibre/Tube) 6×4 6 x 12 8×12
Loose Tube/Filler – ø mm Nom. 2.3 Nom. 2.0 Nom. 2.0
CSM/sheath diameter mm Nom. 3.0 Nom. 3.0 Nom. 3.0/4.8
Outer sheath thickness mm Nom. 2.0
Cable Diameter mm Nom. 17.9 Nom. 17.9 Nom. 19.7
Cable Weight Kg.Km 531 531 624
Max installation tension N 6000
Min. bending radius mm Without Tension
15 x Cable- ø		 Under Maximum Tension
30 x Cable- ø
Temperature range Installation :
-10°C->+60°C		 Transport & Storage :
-40°C->+70°C		 Transport & Storage:
-40°C->+70°C

Application

The cable is specially designed for harsh environments. The multilayer inner sheath HDPE/PA(nylon) withstands aggressive constituents, fluids that might occur on (petro) chemical plants, aliphatic hydrocarbon resistant. The cable which is low smoke, halogen free and flame-retardant, is suitable for installation under and above ground. – Nylon jacket provides anti-termite protection of the cable
– The steel wire armour provides anti-rodent protection
– The outer sheath is flame retardant compound to Heat & Oil and UV resistant

Flame & Fire Rating

  • IEC 60332-3-24 & IEC 60331-25
Main Characteristics
Test Standard Specified value Acceptance Criteria*
Max. tension at installation (short term) IEC 60794-1-2-E1 5000N Δ I/I fibre strain ≤ 0.6%, Δα reversible
Crush IEC 60794-1-2-E3 4000N/100mm Δα ≤ 0.15dB(SM), 0.3 dB (MM) after test
Temperature Range IEC 60794-1-2-F1 -40 -> + 70ºC Δα ≤ 0.15dB/km(SM), 0.3 dB /km(MM)
Water penetration IEC 60794-1-2-F5C sample=3m, water=1m No water leakage after 24 hour

* Values for single-mode fibres, all optical measurements performed at 1550 nm
* Values for multi-mode fibres, all optical measurements performed at 1300 nm

Ordering Information 
FIRETUF LTFIPNWM SERIES FO Cable part numbers are made up using the table below.

The part number always starts with the letters LTFIPNWM to denote that it is a FIRETUF LTFIPNWM SERIES FO Cable. 

This is followed by 3 numbers which symbolizes the core quantity and then 2 letters to denote the fibre type.

Example of a FIRETUF LTFIPNWM SERIES FO Cable part number: LTFIPNWM008M1

The above example describes an OM1 (62.5um, Black Sheath)

FIRETUF LTFIPNWM SERIES FO Cable, with 8 cores.

 

LTFIPNWM SERIES
 
Core quantity
 
FIBER TYPE
 
LTFIPNWM
 
XXX
 
XX
 
002~096 : (2 CORES ~ 96 CORES)
 
SM - SingleMode
M1~M4 - MultiMode

LTFPNWM Flame Retardant SERIES

Heavy Armoured Cable Nylon + LSZH Sheath, Chemical/Corrosive Resistant

 

Application

  • The cable is specially designed for harsh environments. The multilayer inner sheath HDPE/PA(nylon) withstands aggressive constituents, fluids that might occur on (petro) chemical plants, aliphatic hydrocarbon resistant. The cable which is low smoke, halogen free and flame-retardant, is suitable for installation under and above ground. – Nylon jacket provides anti-termite protection of the cable
    – The steel wire armour provides anti-rodent protection
    – The outer sheath is flame retardant compound to Heat & Oil and UV resistant

Flame Rating

  • IEC 60332-3-22

Features

  • Central Strength Member(CSM): glass fiber reinforced plastic rod(FRP)
  • Tube: thermoplastic material containing up to 12 optical fibres and filled with a suitable water tightness compound.
  • Stranding: The required numbers of elements (tubes or fillers) are SZ stranded around the central strength member.
  • Core Wrapping: water-blocking tape & yarn (dry-core)
  • Inner sheath: HDPE
  • Nylon sheath: Black Nylon Polyamide 12 (PA 12)
  • Outer Armour: Galvanized Steel Wire
  • Outer Sheath: LSZH flame retardant
Configuration
No. of Flbers   4,8,12,24 32 36,48,72
Design (Elements x Fibre/Tube)   6×4 6×8 6×12
Loose Tube/Filler – ø mm Nom. 2.1 Nom.2.1 Nom. 2.1
CSM/sheath diameter mm Nom. 2.3 Nom. 2.3 Nom. 2.3
Outer sheath thickness mm Nom. 2.0
Cable Diameter mm Nom. 16.4 Nom.16.4 Nom. 16.4
Cable Weight kg.km 436 436 436
Max installation tension N 5000
Min. bending radius ( Without Tension) mm 15 x Cable ø
Min. bending radius ( Under Max. Tension)   25 x Cable ø
Main Mechanical and Environmental characteristics  
Test Standard Specified value Acceptance Criteria*  
Max. Tension IEC 60794-1-2-E1 See Configuration 
Δ I/I fibre strain ≤ 0.6%,
Δα reversible
  
Crush IEC 60794 1-2-E3 4000 N/100 mm; reversible 
Δα ≤ 0.15dB(SM), 0.3 dB (MM)
after test
  
Water penetration IEC 60794 1-2-F5C Sample=3m,water column=1m 
No water leakages after 24hours
  
Temperature Range Transportation & Storage -40° C to +70 ° C  
Installation -10° C to + 70° C  
Operation -40° C to +70 ° C   
* Values for single-mode fibres, all optical measurements performed at 1550 nm
* Values for multi-mode fibres, all optical measurements performed at 1300 nm
 
Ordering Information 
LTFPNWM SERIES FO Cable part numbers are made up using the table below.
The part number always starts with the letters LTFPNWM to denote that it is a LTFPNWM SERIES FO Cable.
This is followed by 3 numbers which symbolizes the core quantity and then 2 letters to denote the fibre type. 
Example of a LTFPNWM SERIES FO 
Cable part number: LTFPNWM008M1

The above example describes an OM1 (62.5um, Black Sheath) LTFPNWM SERIES FO Cable, with 8 cores.
 

 

LTFIPNWM SERIES Core Qty FIBRE TYPE  
LTFPNWM XXX 
                XX
  
 
012-12 CORES
016-16 CORES
024-24 CORES
048-48 CORES
096-96 CORES

 

 
SM-SINGLEMODE, G652D, 9µm
M1-OM1, 62.5µm
M2-OM2, 50µm 
M3-OM3, 50 µm 
M4-OM4, 50µm