Li-09YS(St)C11Y 2 x 0.35 mm² LSZH

CanBus-Cable

Construction
Conductor stranded bare copper wire, diameter 7 x 0.26 mm Φ 0.78 mm (cross section 0.35 mm²)
Insulation Foam-Skin PP, Φ 2.2 ± 0.1 mm wall thickness 0.71 mm
Twisting 2 cores + 2 x PP-fillers twisted to the pair Φ 4.4 mm
Core identification 1x white, 1x green
Overall screen 1 x PET-Al-foil + Φ 4.6 mm tinned stranded drain wires 19 x 0,15 mm + tinned copper braid Φ 5.2 mm optical coverage ≥ 65%
Foil 1 x PET-foil under sheath Φ 5.3 mm
Sheath PUR Low Smoke Zero Halogen Φ 6.8 ± 0.2 mm wall thickness 0.75 mm
Sheath colour Black, RAL 9005
Outer Diameter Nom. 6.8 mm
Weight Nom. 46.7 kg/km
Tensile force N 165
Mechanical properties
Bending radius during installation - without load - with load  ≥ 5 x cable diameter ≥ 10 x cable diameter
Operating temperature - 30°C up to + 70°C
Storage temperature -40°C up to 85°C
UV resistance of sheath material acc. to IEC60068-2-5
Ozone resistance acc. to EN 60811-2-1, clause 8
Smoke density acc. to EN 50268-2, IEC61034-1 and 2
Corrosivity acc. EN 50267-1 and 2, IEC 60754-1 and 2
Testing of oil resistance of PU sheath material acc. to VDE 0282 Part 10 and EN 60811-2-1 and thermal endurance graph (Arrhenius) and life expectancy of PU sheath material acc. to ISO 2578 Requirements after aging: max. change of tensile strength: -50% max. change of elongation at break: -50% Mobil DTE 13 M (Hydraulic oil) Tribol 1710/20 (Gear oil) 150 days at 100°C approx. 24 years at 65°C ≥ 25 years at 20°C 140 days at 100°C approx. 18 years at 65°C ≥ 25 years at 20°C
Electrical properties at 20°C
Conductor resistance (at 20 ± 5 °C) ≤ 54.5 Ω/km
Characteristic impedance at 1 MHz 120 Ω ± 15%
Insulation resistance (at 20 ± 5 °C and 500 V) ≥ 10 GΩxkm
Operating voltage (50 Hz, rms) 60 V
Test voltage (AC, 1 min) Core/core and core/screen 1.2 kV
Transfer impedance (up to 10 MHz, acc. to IEC 62153-4-3) ≤ 10 mΩ/m

Application

  • The following CanBus cable is suitable for transmission of CanBus signals according to DIN19245 and EN 50170
  • The following CanBus cable is suitable for transmission of CanBus signals according to ISO 11898 - 2
  • The cable is suited for fixed indoor and outdoor installation and under certain conditions also for mobile use.
  • The cable is halogen free,flame retardant and oil resistant. The sheath material is tested in Hydraulic oil.
  • ARAL VITAM 32, Mobil DTE 13M, Gear oil ARAL DEGOL BG Plus 320 and Tribol 1710/320

Standards

acc. To customer Specification

Flame resistance

  • IEC 60332 - 1,IEC -61034-2,IEC 60754 - 1 /2
Ordering Information
P/N Product Description P.U
1003011 CS2875900 CanBus-Cable, Li-09YS(St)C11Y 2 x 0.35 mm² LSZH 1000m/drum