Category: product

Security & Comms Cable, SXACS Series

Shielded, LSZH

 

 

Application

  • Security, Intercom, Broadcast, Sound, Audio Systems

Flame rating

  • LSZH IEC 60332-1
Construction
 
Conductor
 
Grade A Bare Copper, Stranded
 
Operating Voltage
 
300V
 
Insulation
 
XLPE
 
Insulation colour
 
1 - Black, 2 - Red, 3 - White, 4 - Green
 
1st Screen
 
100% Overall Aluminum Foil Screen
 
Sheath
 
LSZH with Ripcord
 
Sheath colour
 
Grey , Red
 
Rated temperature
 
Up to 75°C
Cable Dimension
Conductor Size No of Pairs OD (mm)
12 AWG 1 Pair 7.6
  2 Pairs 11.3
14 AWG 1 Pair 6.6
  2 Pairs 9.7
16 AWG 1 Pair 5.2
  2 Pairs 7.6
18 AWG 1 Pair 4.6
  2 Pairs 6.6
20 AWG 1 Pair 4.2
  2 Pairs 6.1
22 AWG 1 Pair 3.8
  2 Pairs 5.3
 
Ordering Information 
SXACS Series part numbers are made up using the table below.
The part number starts with SXACS to denote that it is a SXACS cable.
The following number shows the number of pairs and the last 2 numbers signifies the AWG.
Any letter behind would describe the sheath type and colour.

Example of a SXACS part number-SXACS1P22LRD-3H
The above example describes SXACS cable with 1 pairing, 22 AWG. Sheath type LSZH.

 

SXACS PAIRING AWG SHEATH Colour Drum Length
SXACS X XX X X – X
  1P – 1 Pair
2P – 2 Pairs		 12 – 12 AWG
14 – 14 AWG
16 – 16 AWG
18 – 18 AWG
20 – 20 AWG
22 – 22 AWG
L- LSZH

GY-Grey
RD- Red

 

-3H : 305m

-5H : 500m
 

Draka RS-485 22 AWG FPE

Serial Data Communication Cable

 
Construction
Conductor Stranded Tinned Copper
Insulation Foam PE
Colour Pair 1: 1 x white, 1 x blue Pair 2: 1 x white, 1 x orange
Pair 3: 1 x white, 1 x black Pair 4: 1 x green
1st Screen 1 x AL-Mylar Wrap, overlapping ≥ 25 %
Drain Wire Stranded Tinned Copper
Braid Shield Tinned Copper ; coverage ≥ 85%
Sheath PVC/LSZH/LSZH ATARUV
Braid Armour (Optional) Galvanized Steel Wire Braid
Outer Sheath (Optional) LSZH / LSZH ATARUV
Pair 1P 2P 3P 4P
  Nom. Cable OD mm
TC/FPE/OS/TCWB/PVC 6.5 8.5 9.5 11.5
TC/FPE/OS/TCWB/LSZH 6.5 8.5 9.5 11.5
TC/FPE/OS/TCWB/LSZH ATARUV 6.5 8.5 9.5 11.5
TC/FPE/OS/TCWB/LSZH/SWB/LSZH 10.8 13.4 13.8 15.8
         
 

Application

  • For multi-dropped,medium-speed,serial data communication in electrically noisy industrial environments.Application includes industrial networks using RS-485/RS- 422/RS-232 transceivers, for Process Automation (chemicals, brewing, paper mills), factory automation (autos, metal fabrication), HVAC, security, motor control and motion control.Suitable for outdoor installation.

Flame Rating

  • IEC 60332 – 1
 
Electrical properties  
Conductor Resistance (at 20ºC)   ≤ 58 Ω/km  
Capacitance cond. to cond. Nom. 12.5 pF/ft  
Impedance Nom. 120 Ω  
Rated Voltage 300 V  
Mechanical properties  
Operating temperature -20°C to +70°C  
Bend Radius 10 x OD  
     
Ordering Information 
RS-485  part numbers are made up using the table below.
The part number starts with 48 to denote that it is an EIA-485 cable.
The following number shows the number of pairing and the last 2 numbers signifies the AWG.

Example of an EIA-485 part number

48124LB 

The above example describes an RS-485 SWB cable with 1 pair, 24 AWG. Sheath type LSZH, SWB

 

RS- 485 PAIRING AWG SHEATH OUTER JACKET ADDITIVE  
48 X XX X X X  
  
1 - 1 Pair
2 - 2 Pair
4 - 4 Pair



22 -22 AWG


(nil) - PVC
L- LSZH


B - SWB
 RTV- Anti-Rodent, Anti-Termite, UV Resistance  
 

UCFIBRE™® MTV SERIES

2-24 Cores, Indoor Tight Buffer Distribution Cable, PVC OFNR Sheath

 

Overview

One of the most widely used UCFIBRE™® Indoor cable, MTV series is excellent for indoor installation that provides a safe setup against flame propagation and its flexible, yet robust construction makes installation at ease.

Additional Options

  • Steel Wire Braiding for armouring protection

Features

  • Tight buffer: Each fibre is coated to 0.9mm with PVC
  • Strength Member : Aramid yarn
  • Outer Sheath: PVC UL1651
  • Suitable for indoor installation requiring flame retardant
Main Characteristics
Test Standard Value Sanction*
Short term tension IEC 60794-1-2-E1 660 N (2F-12F),
1200N (24F)		 Fibre strain ≤ 0.6%,Δα reversible
Max operation tension IEC 60794-1-2-E1 198N (2F-12F),
340N (24F)		 Fibre strain ≤ 0.2%,Δα ≤0.4 db (MM),  ≤0.3db (SM)
Crush (short term) IEC 60794-1-2-E3 1000 N / 100mm Δα ≤0.4 db (MM),  ≤0.3db (SM), no damage
Temperature range IEC 60794-1-2-F1 -20 -> +70°C Δα ≤ 0.6 dB /km(MM),
Δα ≤ 0.40dB/km (SM)

* value of multi mode fibres, all optical measurements perform at 1300nm
* value of single mode fibres, all optical measurements perform at 1550nm

Technical Data
No. of Fibres   2,4,6 8 12 24
Design   1×2,4,6 TB 1×8 TB 1×12 TB 1×24 TB
Tight buffer mm 0.9 ± 0.05 0.9 ± 0.05 0.9 ± 0.05 0.9 ± 0.05
Cable Nom. Diameter mm 4.8 5.4 6.2 8.8
Cable Nom. Weight kg/km 20 26 33 60
Min. bending radius   Without Tension
10 x Cable Ø		 Under Maximum Tension
20 x Cable Ø
Temperature range °C
Installation
-10 -> +60		 Transport. & Storage
-40 -> +70		 Operation
-20  -> +70
Flame Retardant    UL 1651
Ordering Information
UCFIBRE™® MTV SERIES FO Cable part numbers are made up using the table below. The part number always starts with the letters MTV to denote that it is an UCFIBRE™® MTV SERIES FO cable. This is followed by 3 numbers which symbolizes the core quantity and then 2 letters yo denote the fibre type. Example of a UCFIBRE™® MTV SERIES FO Cable part number: MTV008M1 The above example describes an OM1(62.5Sum, Orange Sheath) UCFIBRE™® MTV SERIES FO Cable, with 8 cores.
 
MT SERIES CORE QUANTITY FIBRE TYPE
MTV XXX XX
 
002 – 2 CORES
004 – 4 CORES
006 – 6 CORES
008 – 8 CORES
012 – 12 CORES
 SM – SINGEMODE, G652D, 9um (yellow sheath)
M1 – OM1, 62.5um (orange sheath)
M2 – OM2, 50um (orange sheath)
M3 – OM3, 50um (aqua sheath)
M4 – OM4, 50um (violet sheath)

Draka UC500 Cat.6a F/FTP 23AWG LSZH

Standard, Solid, 23AWG, Screened

Application

  • Generic cabling systems
  • Primary (Campus), Secondary (Riser), Tertiary (Horizontal)
  • IEEE 802.3: 10Base-T; 100Base-T; 1000Base-T; 10G Base-T
  • IEEE 802.5 16 MB; ISDN; TPDDI; ATM
  • IEEE 802.3af (PoE); IEEE 802.3a(PoE+); IEEE802.3bt (PoE++)

Standards

  • ANSI TIA / EIA 568.2-D
  • ISO/IEC 11801-1/2
  • IEC 61156-5
  • EN 50173-1
  • EN 50288-10-1

Flame Rating

  • LSZH: IEC 60332-1-2 ; IEC 60332-3-22; IEC 60754-1&2; IEC 61034-2
Construction
Conductor Bare copper wire Nom. ≥ ∅ 0.546 mm (AWG23)
Insulation Foam skin PE
Sheath LSZH
Sheath colour BLUE or WHITE
Pair Screen High Performance Individual Pair Screen
Overall Screen Aluminum Laminated Foil, Tinned Copper drain wire (AWG26)
Outer Diameter Nom. 7.5 mm
Weight Nom. 52 kg /km
Mechanical properties
Minimum bending radius without load ≥ 4 x O.D
Minimum bending radius with load ≥ 8 x O.D
Temperature range during operation  -20°C to +60°C
Temperature range during installation  0°C to +50°C
Electrical properties at 20°C
DC Resistance ≤ 9.38 Ω / 100m 
DC Loop Resistance ≤ 187.6 Ω /km
DC Resistance unbalance ≤4 %
Mutual Capacitance at 1 kHz ≤ 5.6 nF /100m
Capacitance unbalance (pair to ground) ≤ 330 pF /100m
Characteristic impedance 1- 100 MHz 100 ± 15 Ω
Nominal velocity of propagation Nom. 75 %
Propagation delay (@250MHz) ≤  536 ns /100m
Delay skew ≤ 45 ns /100m
Ordering Information
SAP IC UC P/N Product Description P.U
60094736  84075WH-5H Draka UCDATA CATEGORY CABLE UC500 CAT.6A FFTP 4PAIR 23AWG LSZH WHITE IEC60332-1 500m/reel

Draka UC300 Cat.5e U/UTP 24AWG

Standard, Solid

 
Construction
Conductor Bare copper wire Nom. ≥ ø 0.482 mm (AWG24)
Insulation PE
Sheath PVC & LSZH ( Ripcord underneath)
Sheath colour Grey
Outer Diameter Nom. ∅ 5.0 mm
Weight Nom. 28.0 kg / km
Mechanical properties
Minimum bending radius with load ≥ 8 X OD
Minimum bending radius without load ≥ 4 X OD
Maximum tensile load, Installation Nom. 100N
Temperature range during operation -20°C up to +60°C
Temperature range during installation  0°C up to +50°C
Electrical properties at 20°C
Characteristic Impedance (1-100 MHz)  100 ± 15 Ω
DC Loop Resistance ≤187.6 Ω /km
DC Resistance Unbalance   ≤ 5%
Mutual Capacitance (@800 Hz)   ≤ 5.6 nF/100m
Capacitance Unbalance (pair to ground)   ≤  330 pF/100m
Velocity of Propagation Nom. 65%
Propagation Delay (@100 MHz) ≤ 536.0 ns/100m
Delay Skew ≤ 45.0 ns/100m
Max Attenuation @100 MHz 22.0 dB/100m
Min. NEXT @100MHz 35.3 dB/100m
Min. PS-NEXT @100MHz 32.3 dB/100m
Min. ELFEXT @100 MHz 23.8 dB/100m
Min. PS-ELFEXT @100 MHz 20.8 dB/100m
Min. Return Loss @ 100 MHz 20.1 dB/100m
   
  • * All above stated values are nominal and subject to changes.
  • * More details on electrical properties available at technical datasheet.

Application

    • Primary (Campus)
    • Secondary (Riser)
    • Tertiary (Horizontal)
    • IEEE 802.3: 10Base-T; 100Base-T; 1000Base-T;
    • IEEE 802.5 16 MB; ISDN; TPDDI; ATM
    • Power over Ethernet PoE/PoE+
    • IEEE 802.3af and IEEE 802.3at

Standards

  • ANSI TIA/EIA 568-C.2;
  • ISO/IEC 11801 2nd ed.; IEC 61156-5 2nd ed.;
  • EN 50173; EN 50288-3-1

Flame Rating

  • PVC IEC 60332-1-2
  • LSZH IEC 60332-1-2; IEC 60754-1&2; IEC 61034-2
 
Ordering Information  
SAP IC UC P/N Product Description P.U  
60093910 52004GY-3H Draka UCDATA CATEGORY CABLE UC300 CAT.5E  UUTP 4 PAIR 24AWG PVC GREY IEC60332-1, Indoor 305m/box  
60093912 52026GY-3H Draka UCDATA CATEGORY CABLE UC300 CAT.5E  UUTP 4 PAIR 24AWG LSZH GREY IEC60332-1, Indoor 305m/box  

 

UCCONNECT® Ultra High Density MTP®/MPO Module

Ultra High Density MTP®/MPO Module

Features

  • Available in Duplex LC and Quad LC
  • Available in G657A, OM3 and OM4
  • Utilizes bend-insensitive fibre 
  • Quick release mechanism
  • Type “P” is Draka UC defacto, Type A and B are available 
  • Utilized with UC9600 1U/2U/4U Patch Panel

Application

UC9600 are used to house and organize the trunk fiber optic cable, compatible with MPO-LC cassettes. Easy access from front and rear, panels has 6 slots, which can install 6 module cassettes. It is ideal for fast and reliable patch solutions within main, horizontal and equipment distribution areas.

Construction
Standard ANSI/TIA-568-C.3,ISO/IEC 11801, RoHS 
Material Housing ABS
Module Housing Colour Black
Front Adaptor Duplex or Quad LC with dust cap
Rear Adaptor MTP®/MPO with dust cap
Assemblies Pre_installed male MTP®/MPO to fanout LC assemblies inside module
 
Performance
  Insertion Loss Return Loss (per fiber)
  (MTP®/MPO+LC)
1x8F/1x12F/1x24F		  
Single Mode 0.75dB (Standard)
0.50dB (Low Loss)		 55dB
Multi Mode 0.50dB (Standard)
0.35dB (Low Loss)		 26dB
Ordering Information
UC P/N Product Description P.U Weight (g)
Type “P”      
PPMLPM39652D-P24 Draka UCCONNECT® UC9600 Series UHD Low Loss 1x MPO/UPC-24(M) to LC/UPC(D) Module MM OM4 Type P Violet 1 set/box 150
PPMLPM29662D-P24 Draka UCCONNECT® UC9600 Series UHD Low Loss 2x MPO/UPC-12(M) to LC/UPC(D) Module MM OM3 Type P Aqua 1 set/box 150
 

 

UCFIBRE™® UT SERIES

2-12 Cores, Light Armoured, Uni-tube Cable, PE Sheath

Features

  • Unitube: Thermoplastic material, containing up to 12 fibres and filled with a
    suitable water tightness compound
  • Peripheral Strength Elements: Aramid yarns
  • Armour: Corrugated steel tape
  • Outer Sheath: PE
  • Suitable for Duct Buried or Outdoor Installation

Standards

  • ANSI/TIA-568-C.3, ISO/IEC 11801, IEC 60794-3-10
Main characteristics
Test Standard Value Sanction*
Maximum Tension at
installation (short term)		 IEC 60794-1-2-E1 1200N  ΔI /l fibre ≤ 0.6%, Δα reversible
Maximum Tension at
installation (Long term)		 IEC 60794-1-2-E1 800 N   ΔI /l fibre ≤ 0.2%, Δα reversible
Crush (short/long term) IEC 60794-1-2-E3 1500N /100mm   Δα ≤ 0.3 dB (MM) , Δα ≤ 0.1 dB (SM);        cable integrity
Temperature range IEC 60794-1-2-F1 -20°C -> +70°C  

*values for single-mode fibres, all optical measurements performed at 1550 nm
*values for multi-mode fibres, all optical measurements performed at 1300 nm


Overview

UT Series is excellent robust
installations that enables flexible
bending radius but till provide
adequate mechanical protection in
exposed installation environment,
ie outside buildings facilities.

Additional Options

  • UV Resistance
Technical data
No. of Fibres   2, 4, 6, 8, 12
Design   1×12
Loose Tube / Filler – ∅ mm 3.0 nominal
Sheath thickness mm 1.5 nominal
Cable Diameter mm 8.1± 0.5
Cable Weight kg / km 80
Max installation tension N 1200
Min. bending radius mm
Without Tension
10 x Cable ø		 Under Maximum Tension
20 x Cable ø
Temperature range °C Installation
-10°C -> +60°C;		 Transport. & Storage
-40°C -> +70°C ;		 Operation
-20°C -> +70°C
Flame Retardant  
NA
Ordering Information
UCFIBRE UT SERIES FO Cable part numbers are made up using the table below.The part number always starts with the letters UT to denote that it is a UCFIBRE UT SERIES FO Cable. This is followed by 3 numbers which symbolizes the core quantity and then 2 letters to denote the fibre type.Example of a UCFIBRE UT SERIES FO Cable part number:

 

UT006M2

The above example describes an OM2 (50um, Orange Sheath) UCFIBRE UT SERIES FO Cable, with 6 cores.
 

 

UTM SERIES CORE QUANTITY
FIBRE TYPE
UT XXX XX
  002 : 2 cores
004 : 4 cores
006 : 6 cores		 SM – SINGEMODE, G652D, 9um (Yellow sheath)
M1 – OM1, 62.5um (Orange sheath)
M2 – OM2, 50um (orange sheath)
M3 – OM3, 50um (aqua sheath)
M4 – OM4, 50um (aqua sheath)
 

 

UC CONNECT® CATEGORY 6A Field Termination Plug, Straight

Overview

  • Field Termination Plug compatible with UCCONNECT® system
  • Category 6A/EA hardware compliant performance.
  • RoHS & MPTL Compliant
GENERAL SPECIFICATIONS
Item Description
Termination Capability 22-26AWG solid wire , 23-27AWG stranded wire
Supporting Ins. Dia. 1.0 ~ 1.65 mm
Supporting Cable Type Shielded/Unshielded Cable
Supporting Cable Diameter  STP : 6~9.0mm ; UTP : 5.5~8.5mm
PoE PoE+ and 4PPoE
Current Rating  1.5A
MECHANICAL PROPERTIES
Item Description
Plug Housing Zinc Alloy (STP)/PC FR (UTP)
Plug Pins Phosphor bronze with 50µ” gold plating
IDC Durability 750 mechanical Cycles
Protection Category IP20

Ordering Information
Part Number Description Weight Packaging Unit
FTPSA00 Draka UCCONNECT CAT6A STP Field Termination Plug, Straight 16.1g 1 pc per bag
FTPUA00 Draka UCCONNECT CAT6A UTP Field Termination Plug, Straight 13.1g 1 pc per bag

Draka UC Dual Boot CAT.6A SFTP Copper Patch Cord

Cat.6a S/FTP 26AWG 500 MHz, Stranded

Standards

  • ANSI TIA/EIA 568.2-D ; ISO/IEC 11801-1/2 ; EN 50173 ; IEC 61935 ;IEC 60603-7

Flame & LSZH Rating

  • IEC60332-1 ; IEC 60754-1&2; IEC 61034-2
GENERAL SPECIFICATIONS
Item Description
Size 26 AWG
Type Stranded Bare Copper
Insulation FOAM PE
Individual Shield Aluminum Polyester Tape
Overall Shield Tinned Copper Wire Braiding
Jacket  LSZH, ø 6.4mm
ASSEMBLY PROPERTIES
Item Description
RJ45 Modular Plug 50µm gold plated contact
Termination Coding TIA 568-B
Plug Housing  UL94V-0 rated clear polycarbonate
Boot Unique dual boot design
Ordering Information
Part Number Description Weight Packaging Unit
PC8420GN-1  Draka UCCONNECT CAT.6a DBOOT PATCH CORD SFTP LSZH 26AWG 1M GREEN 31.7g 1pc/bag
PC8420BL-2 Draka UCCONNECT CAT.6a DBOOT PATCH CORD SFTP LSZH 26AWG 2M BLUE 63.4g 1pc/bag
PC8420WH-3 Draka UCCONNECT CAT.6a DBOOT PATCH CORD SFTP LSZH 26AWG 3M WHITE 95.1g 1pc/bag

Draka UC Dual Boot CAT.6A UUTP Copper Patch Cord

Cat.6a U/UTP 24AWG 500 MHz, Stranded

Standards

  • ANSI TIA/EIA 568.2-D ; ISO/IEC 11801-1/2 ; EN 50173 ; IEC 61935 ;IEC 60603-7

GENERAL SPECIFICATIONS
Item Description
Size 24 AWG
Type Stranded Bare Copper
Insulation PE
Jacket  LSZH, ø 5.9mm
ASSEMBLY PROPERTIES
Item Description
RJ45 Modular Plug 50µm gold plated contact
Termination Coding TIA 568-B
Plug Housing  UL94V-0 rated clear polycarbonate
Boot Unique dual boot design
Ordering Information
Part Number Description Weight Packaging Unit
PC8120GY-1  Draka UCCONNECT CAT.6a DBOOT PATCH CORD UUTP LSZH 24AWG 1M GREY 31.7g 1pc/bag
PC8120GY-2 Draka UCCONNECT CAT.6a DBOOT PATCH CORD UUTP LSZH 24AWG 2M GREY 63.4g 1pc/bag
PC8120GY-3 Draka UCCONNECT CAT.6a DBOOT PATCH CORD UUTP LSZH 24AWG 3M GREY 95.1g 1pc/bag